FDM · filament
Anycubic Kobra S1
- largest piece
- 250 × 250 × 250 mmwhat we keep tomanufacturer spec 250 × 250 × 250 mm
- colours
- One colour per print
- detail levels
- Economy 0.24 mmStandard 0.16 mmHigh detail 0.08 mm
- materials
- PLA · PETG
what we can do now
What each printer can do
4 printers of 3 types, for FDM and resin, in Wijchen. Every size on this page comes from the same source as the price calculation and the checkout check: what is here, the machine can do.
- printers
- 4
- FDM
- 1
- resin
- 3
- largest piece
- 250 × 250 × 250 mm
resin · cured with light
Creality Halot R6
- largest piece
- 127 × 80 × 160 mmwhat we keep tomanufacturer spec 130.56 × 82.62 × 160 mm
- colours
- One colour per print
- detail levels
- Standard 0.05 mmHigh detail 0.03 mm
- materials
- Tinted resin · Raw resin
resin · cured with light2×
Anycubic Photon Mono
- largest piece
- 126 × 77 × 165 mmwhat we keep tomanufacturer spec 130 × 80 × 165 mm
- colours
- One colour per print
- detail levels
- Standard 0.05 mmHigh detail 0.03 mm
- materials
- Tinted resin · Raw resin
full colour · expected, no date
HeyGears G1X
Ordered, not in use yet. What we promise: colour straight from the printer, up to 13 cm tall in one piece, for display.
More about the G1X →will my piece fit?
This is how big it can be
FDM, one colour
250 × 250 × 250 mm
Resin, the finest detail
127 × 80 × 160 mm
The sizes are for one piece from one print job. Upload your file and the size check tells you right away whether it fits, and on which machine.
Bigger than this, or a series? Request a quote and we will see what is possible. Business and quotes
materials
What we print
PLA
PLA in 12 colours, one colour per print. For terrain, buildings, props and parts.
PETG
PETG, for the vases and for parts that need more than PLA.
Tinted resin
Tinted resin in 3 tints, one tint per piece, solid or translucent.
Raw resin
Raw resin, grey: the finest detail, ready to paint.
detail levels
Economy, standard, high detail
The detail level sets the layer height. Thinner layers give smoother curves and finer detail, and take more print time. Which layer height belongs to which level is listed per machine above. Resin has no economy level: a thicker layer hardly saves anything there.
colour
More colours in one piece
One print is one colour. We do not do colour changes within a single model: it wastes purge material and the result is rarely clean. What we can do: print separate parts, each in its own colour, that click together into one piece afterwards.
Full colour: not available yet, read morenext